Training Fire-Gas Detection & Monitoring Systems

Training Course Description

The concept of a Safety Instrumented Fire & Gas Systems (SI-FGS) has emerged in the process industry. Its arrival is has generated both controversy and confusion. The term SI2 of 13FGS represents the attempted application of perfo rmance based safety concepts to the design of Fire & Gas Detection Systems. ANSI / ISA S84.01 states that Fire & Gas Systems where operation action is required to initiate the system is not covered by the standard. Thus, those systems that automatically initiate an action could be addressed by the performance based Safety Instrumented System standards. However, the inherent differences between a Safety Instrumented System and a Fire & Gas System pose some challenges for an end user attempting to merge design techniques.
A Safety Instrumented Fire & Gas System (SI-FGS) is a system comprised of initiating device sensors, logic solvers, final control elements, fire safety functions and / or notification appliances for the purpose of mitigating an event when predetermined conditions are violated.
The Fire and Gas system (FGC) is designed to give the earliest possible warning and location of a fire in its initial stage, a flammable gas leakage or accumulation up to the lower explosive limit (LEL %) and any toxic gas likely to be present up to the occupational exposure limits (OEL).

Training Course Objectives

  • Describing the main types of smoke detectors and their working principle
  • Understanding the working principle of the different types of heat detectors
  • Describing the function of VESDA system
  • Knowing the typical loop architecture of smoke/ heat detectors
  • Describing different types of fire detectors and their principle of operation
  • Specifying appropriate type of fire detector for the service
  • Describing the purpose of Optical Integrity “OI” optional
  • Troubleshooting and identifying problems with fire & gas monitoring systems
  • Describing the principal of operation of Hydrocarbon Gas Detectors
  • Describing the principal of operation of Toxic Gas Detectors

Who Should Attend?

  • Process Control Engineers and Technicians
  • Process Control Designers and Systems Engineers
  • Instrumentation and control system engineers
  • Plant Engineers, Maintenance Engineers and supervisors
  • HSE engineers
  • Electrical and instrumentation Supervisors and technicians
  • Who wish to gain a solid introduction to Fire & Gas detection System.

Training Course Details/Schedule

  • Fire and Gas System Purposes, Architecture and brief about the Traditional and Addressable Systems.
  • Different types of Detectors, operation and application:
  • Manual Call Points
  • Smoke Detectors
  • Heat Detectors
  • Infra-Red Oil Mist Detectors
  • Ultra Violet Flame Detectors
  • Infra-Red Flame Detectors
  • Combined Ultra Violet / Infra-Red Flame Detectors
  • Flammable Gas Detectors
  • Toxic Gas Detectors
  • Spill detectors
  • Fusible Plugs
  • Detector Interface Modules
  • Fire Detectors Modules
  • Flammable Gas Detectors Module
  • Toxic Gas Detector Module
  • Fire & Gas control panel; Electrical Operation, Control Action, Interface with DCS, PLC System, Event Logging
  • Electrical connection of detectors in a loop
  • Fire Extinguishing Control Systems components and operation: -
  • Total Flood Systems
  • Discharge Solenoids
  • Mechanical Lock-Out Facility
  • Discharge Pressure Switch
  • Local Release Facility
  • Visual Warning Lamp Clusters
  • Extinguishing Discharge Audible Alarm.
  • General Alarms
  • General Audible Alarms
  • General Visual Alarms
  • Gas Hazard Warning Lamps
  • Read and understand a fire detection and suppression system overview drawing.
  • Deluge System (brief about the purpose and controls on a sample drawing)
  • Typical Fire & Gas Systems
================================================================================ General Notes All our courses can be facilitated as Customized In-House Training course. Course duration is flexible and the contents can be modified to fit any number of days. As for Open Enrolment Courses, we offer our clients the flexibility to chose the location, date, and time and our team of experts who are spread around the globe will assist in facilitating the course. The course fee includes facilitation, training materials, 2 coffee breaks, buffet lunch and a Certificate of successful completion of Training. FREE Consultation and Coaching provided during and after the course. VENUE Yogyakarta, Jakarta, Bandung, Bogor, Cirebon, Solo, Semarang, Surabaya, Malang, Bali, Lombok, Samarinda, Balikpapan, Banjarmasin, Pontianak, Makassar, Medan, Palembang, Lampung, serta Timor Leste, Thailand, Singapore, dan Kuala Lumpur (dengan harga dan minimal kuota yang berbeda). Permintaan Brosur penawaran Training Pelatihan ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.